Built as a workhorse to access any backcountry zone, the K2 Marauder Splitboard Package is the perfect partner for the skin track and the reliable atop a steep couloir.
Shape
Tapered Directional – The tail width is slightly tapered (2-20 mm). This facilitates turn initiation and improves flotation in deeper snow without sacrificing edge-holding on hard snow.
Radial Sidecut – Radial is the classic sidecut for consistent forward and switch response.
Core
Aspen Select Core – Each strip of FSC-certified wood is hand-selected to ensure unsurpassed core quality and lightness.
Popster – The Popster core profile tapers underfoot and thickens on the outside of the bindings before tapering again at the tip and tail to maximize the wood’s natural snap and pop. It’s as if your skateboard kicktail is finally connected to your snowboard.
FSC-certified wood core
Laminated
Ghost Basalt Stringers – Basalt strings are sewn into a trail layer for durable pop, control and wet ride at speed, as well as easy handling when you stay calm.
Biaxial Medium Density Fiberglass – European-made layers of medium-density fiberglass guarantee consistent quality, for lightweight, lively boards.
Sidewalls
ABS Sidewalls – The molecular structure of ABS can be described as a concrete bar with rubber nuggets inside, combining strength for energy transfer and damping properties for impact absorption.
Base
Sintered base – Offers a moderate balance between the speed created by a hard surface and good wax retention.
Fine stone finish – The fine stone finish helps to accelerate in powder or softer snow conditions.
Edges
All-Mountain Edge Bevels – A 1° bevel for edge hold on key parts of the rib line and a 2° bevel between the feet. This gives very solid edge hold, without snagging.
Shape
Directional Twin – A twin shape for freestyle moves with directional flex for high-speed power.
Radial Sidecut – Radial is the classic sidecut for consistent forward and switch response.
Core
Aspen core – Full-length aspen core with high-density birch strips in the binding area.
FSC-certified wood core
Laminates
Biaxial Low Density Fiberglass – Low-density fibers create lighter boards that retain their playful, forgiving flex forever.
Sidewalls
ABS sidewalls – The molecular structure of ABS can be described as a concrete bar with rubber nuggets inside, combining strength for energy transfer and cushioning properties for impact absorption.
Base
Extruded base – Offers durable glide with low-maintenance characteristics.
Standard stone finish
Edges
Non-biting edge bevel – Fully mismatched tip and tail edges for a snag-free ride.
K2 MARAUDER SPLIT WITH SKINS
$ 1 199.95$ 849.95Built as a workhorse to access any backcountry zone, the K2 Marauder Splitboard Package is the perfect partner for the skin track and the reliable atop a steep couloir.
Description
BAP Core – Three species blend of renewable timber to make a strong, lightweight, and durable core.
ICG™ 10 Carbon Glass – Increases pop, liveliness, and longevity of the snowboard without adding unnecessary rigidity.
Sintered 4000 Base – Absorbs wax easily for relentless glide and unrivaled durability.
Splitrack™ Inserts – Narrow channels take the place of standard binding screw inserts for nearly unlimited stance widths and binding placement.
Pomoca® Skins – All K2 Splitboards are sold with 70/30 Nylon/Mohair Pomoca® Touring Skins for superior grip and glide.
Related
Additional information
156 cm, 158 cm wide, 163 cm wide
Related products
SALOMON DANCEHAUL
$ 549.95Terrain: All-Mountain, Freeride, PowderMore
Ability Level : Intermediate-Advanced
Rocker Type: Rocker/Camber/Rocker
Shape: Directional
Flex Rating : Medium
Binding Mount Pattern: 2×4
Core/Laminates : Basalt, Wood
Shape
Tapered Directional – The tail width is slightly tapered (2-20 mm). This facilitates turn initiation and improves flotation in deeper snow without sacrificing edge-holding on hard snow.
Radial Sidecut – Radial is the classic sidecut for consistent forward and switch response.
Core
Aspen Select Core – Each strip of FSC-certified wood is hand-selected to ensure unsurpassed core quality and lightness.
Popster – The Popster core profile tapers underfoot and thickens on the outside of the bindings before tapering again at the tip and tail to maximize the wood’s natural snap and pop. It’s as if your skateboard kicktail is finally connected to your snowboard.
FSC-certified wood core
Laminated
Ghost Basalt Stringers – Basalt strings are sewn into a trail layer for durable pop, control and wet ride at speed, as well as easy handling when you stay calm.
Biaxial Medium Density Fiberglass – European-made layers of medium-density fiberglass guarantee consistent quality, for lightweight, lively boards.
Sidewalls
ABS Sidewalls – The molecular structure of ABS can be described as a concrete bar with rubber nuggets inside, combining strength for energy transfer and damping properties for impact absorption.
Base
Sintered base – Offers a moderate balance between the speed created by a hard surface and good wax retention.
Fine stone finish – The fine stone finish helps to accelerate in powder or softer snow conditions.
Edges
All-Mountain Edge Bevels – A 1° bevel for edge hold on key parts of the rib line and a 2° bevel between the feet. This gives very solid edge hold, without snagging.
Related
SNOWBOARD ARBOR ETHOS
$ 399.95$ 279.95Related
SALOMON PULSE
$ 379.95Terrain: All mountain
Level: Beginner – Intermediate
Rocker type: Flat/Camber/Flat
Shape: Twin directional
Level of flex: Soft
Binding diagram: 2×4
Shape
Directional Twin – A twin shape for freestyle moves with directional flex for high-speed power.
Radial Sidecut – Radial is the classic sidecut for consistent forward and switch response.
Core
Aspen core – Full-length aspen core with high-density birch strips in the binding area.
FSC-certified wood core
Laminates
Biaxial Low Density Fiberglass – Low-density fibers create lighter boards that retain their playful, forgiving flex forever.
Sidewalls
ABS sidewalls – The molecular structure of ABS can be described as a concrete bar with rubber nuggets inside, combining strength for energy transfer and cushioning properties for impact absorption.
Base
Extruded base – Offers durable glide with low-maintenance characteristics.
Standard stone finish
Edges
Non-biting edge bevel – Fully mismatched tip and tail edges for a snag-free ride.
Related