Produits d’entretien et farts à ski
Affichage de 1–12 sur 39 résultats
-
Brosses à base Wintersteiger
24,95 $ – 34,95 $ Choix des optionsCes brosses à base rectangulaire (3 “X 5”) fabriquées par Wintersteiger tiennent bien dans votre main et sont de la qualité que nous attendons du principal fabricant d’outils et de machines de réglage de ski et de planche. Les côtés profilés en bois massif offrent une zone confortable pour saisir la brosse.
Disponible en laiton, nylon et crin de cheval. La brosse en laiton rigide est idéale pour nettoyer la cire dans la structure avant le cirage à chaud, tandis que la brosse en nylon aide à exposer la structure après le cirage à chaud. Terminez avec le crin de cheval pour exposer la texture de base pour assurer un ski ou une planche rapide.
-
CIRE CHAUDE INDY DAKINE HAUTE PERFORMANCE
21,95 $ Choix des optionsCet article vous intéresse ?
Une visite à notre magasin s’impose!
Rencontrez l’un de nos experts sportifs qui pourra vous conseiller parmi notre vaste sélection d’articles de sport neufs ou usagés. -
Promo!
CIRE DE GLISSE SWIX HF5
44,95 $ – 174,95 $ Choix des optionsTemperature range from -8°C to -14°C (18°F to 7°F). Recommended iron temp: 150°C (311°F).
The 5 series is brand new for the Cera Nova X line, and fulfill a hardness gap between the 4 and the 6 series.It was a demand from alpine and has been used with great success in World Cup over the last two seasons. Cross country is also gradually discovering and we see more and more servicemen who prefer this wax in cold conditions.The lower melting point compared to the 4 series makes it easier to work with, without sacrificing the good glide properties it has in cold conditions.
Can be used as a race wax alone or as a base for Cera F powder.
-
Promo!
CIRE DE GLISSE SWIX HF5BW
44,95 $ – 174,95 $ Choix des optionsTemperature range from -8°C to -14°C (18°F to 7°F). Recommended iron temp: 150°C (311°F).
The 5 series is brand new for the Cera Nova X line, and fulfill a hardness gap between the 4 and the 6 series. It was a demand from alpine and has been used with great success in World Cup over the last two seasons. Cross country is also discovering HF05BWX with great interest. The lower melting point compared to the 4 series makes it easier to work with, without sacrificing the good glide properties in cold conditions. HF05BWX is a new special wax with BW solid lubricant additive that reduces friction when very cold snow and dry friction conditions. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. HF05BWX can be used as a race wax alone or as a base for Cera F powder.
-
Promo!
CIRE DE GLISSE SWIX HF6
44,95 $ – 174,95 $ Choix des optionsTemperature range from -5°C to -10°C (23°F to 14°F). Recommended iron temp: 145°C (293°F).
HF6 recipe has proven to be too good to be dropped and is therefore continued as HF06X in the new Cera Nova X range. It’s a very popular wax both in alpine and cross country and has shown good properties on artificial snow in addition to natural snow. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HF06X can be used as a race wax alone, but is often used as a base for Cera F, such as FC06X and HVC Cold (FC60L).
-
Promo!
CIRE DE GLISSE SWIX HF6BW
44,95 $ – 174,95 $ Choix des optionsTemperature range from -5°C to -10°C (23°F to 14°F). Recommended iron temp: 145°C (293°F). Our std. HF6BW recipe has proven to be too good to be dropped and is therefore continued as HF06BWX in the new Cera Nova X range. The BW solid lubricant additive reduces the friction in cold conditions and in contaminated snow. It’s a very popular wax both in alpine and cross country and has shown good properties on artificial snow in addition to natural, transformed older snow.
-
Promo!
CIRE DE GLISSE SWIX HF7
44,95 $ – 174,95 $ Choix des optionsSwix HF7X is a new, improved, proven ski wax formula for cold winter conditions below the freezing point. The hard wax formula creates an easy to work with ski wax that delivers professional results for DIY ski waxers and tuners. Use Swix HF7X as a standalone wax, or as a base layer for Cera F powder. This highly fluorinated race wax is a long-time standard for avid skiers who are ready to take their sliding up a notch.
High fluoro ski race wax
Formulated for cold snow conditions: 18°F to 28°F (-8°C to -2°C)
Recommended iron temp: 284°F (140°C)
Hard formula, easy to work with
40g (1.4oz)
-
Promo!
CIRE DE GLISSE SWIX HF7BW
44,95 $ – 174,95 $ Choix des optionsTemperature range from -2°C to -8°C (28°F to 18°F). Recommended iron temp.: 140°C (284°F).
HF07BWX is a versatile wax suited for normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. The BW solid lubricant additive reduces the friction in cold conditions and in contaminated snow. It’s a very popular wax both in alpine and cross country and has shown good properties on artificial snow in addition to natural, transformed older snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HF07BWX can be used as a race wax alone, but is often used as a base for Cera F, such as FC07X and HVC Cold.
-
Promo!
CIRE DE GLISSE SWIX HF8
44,95 $ – 89,95 $ Choix des optionsThe Swix HF8X wax is a continuation of the classic HF8 which is a legendary wax within ski racing. Over the last decade, this wax has contributed to numerous Olympic and World Cup medals in all ski disciplines. It’s softness and high fluoro content makes it perfect in conditions on both sides of the freezing point. The speed of the iron should be approximately 8-10 seconds on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It is important to have a good iron to get an efficient melting of the wax. HF8X can be used as a race wax alone, but is often used as a base for Cera F, such as FC8X and HVC Warm (FC80L).
High Fluoro Glide Wax
Temperature Range: -4°C to 4°C (25°F to 39°F)
Recommended Iron Temperature: 130°C (266°F)
40g block
-
Promo!
CIRE DE GLISSE SWIX HF8BW
44,95 $ – 174,95 $ Choix des optionsTemperature range from -4°C to +4°C (25°F to 39°F). Recommended iron temp.: 140°C (284°F).
HF08BWX is made harder than the old HF8BW. The adjusted hardness makes the wax more durable and absorbs less dirt. The BW solid lubricant additive reduces the friction in contaminated snow. Excellent results in artificial snow as well as natural transformed older snow, especially noticeable when used alone. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HF08BWX can be used as a race wax alone, but is often used as a base for Cera F, such as FC08X and HVC Warm.
-
Promo!
CIRE DE GLISSE SWIX LF4X
14,95 $ – 34,95 $ Choix des optionsTemperature range from -12°C to -32°C (10°F to -25°F). Recommended iron temperature: 155°C (311°F).
A cold wax for dry friction conditions, which can perfectly be used alone as a race wax when the air humidity is low. It performs very well on artificial snow and has a great durability.
The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. Scraping after appr, one minute.In the warmer part of the temperature range, and when high air humidity, Cera F powder, such as FC04X will increase the performance.
-
Promo!
CIRE DE GLISSE SWIX LF5X
14,95 $ – 34,95 $ Choix des optionsTemperature range from -8C to -14C (18F to 7F). Recommended iron temp: 150C (311F).
The 5 series is brand new for the Cera Nova X line, and fulfill a hardness gap between the 4 and the 6 series. It’s easier to apply than the 4 series, but provides outstanding glide properties within its temperature range, and has a great durability.The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. Scraping after appr, one minute.LF05X can be used as a race wax alone, but is often used as a base for Cera F powder, such as FC05X.